800CFM PERFROMANCE ROCHESTER QJET

    what we have here is the best quailty of a performnace carburetor at a great price !!

1-this carburetor was made for moderately modified street performance vehicles

2-All circuits will be modified and tuned to match the specifications of your engine combination, Including:

3-Idle down tube(idle jet) and idle air bleed resized for smooth idle quality with performance camshafts.

4-Main jet and metering rods selected for clean cruise mixture and strong part throttle response and acceleration.

5-Proper metering rod power piston spring selected to match engine vacuum characteristics

6-Secondary metering rods and hanger selected and high speed air bleeds resized for maxium full throttle horsepower and torque.

7-we choose the highest quality cores for best performance and reliability

8-Strip to bare metal, inspect for defects, then apply dichromate coating for brilliant gold finish.

9 -all hardwhare is Strip and cadmium plate all hardware, including throttle shafts, linkage, levers, spring and screws.

10-Install bushings in baseplate to eliminate any potential vacuum leaks at primary throttle shaft.

11-Install ADUSTABLE PART THROTTLE to allow adjustment of part throttle and cruise speed (steady throttle, 1800-4000 rpm) air/fuel mixture in seconds without any disassembly, tuning can be done while engine is running!

12-Apply epoxy to main body casting plug to eliminate common "leak down" problem associated with Quadrajets.

13-Idle, transition, main, and high speed circuits modified to provided optimum fuel curve for YOUR engine

14-Assembled using the highest quality components, including:

15-New jets and metering rods.

16-High capacity accelerator pump featuring materials that are resistant to alcohol and other additive commonly found in today's fuel

17-new float that can't crack or sink.

18- quality gaskets

19-High flow .130" needle and seat assembly.

20-New electric choke for cold starting.

21-New choke pull-off .

WE CAN BLUE-PRINT YOU THE CARBURETOR TO YOUR NEEDS JUST PLEASE EMAIL US YOUR SPECS !!

714-928-6003