FORD
54000 SB Ford Hi Performance Street Manifold Non-EGR - Polished
54001 SB Ford Hi Performance Street Manifold Non-EGR - Satin
The Power+Plus Typhoon Manifold for all 289/302W/5.0L small block Ford engines is a dual plane 180 degrees medium high rise design that delivers outstanding street or race performance across nearly the entire power band while retaining good throttle response at any speed.
Note that this manifold will not fit 255, Boss 302, or 351W engines. It will fit on '83 and later 5.0L H.O. Mustangs and will work with cruise control. Note that aftermarket carburetors are not compatible with Ford Automatic Overdrive Trans (AOD). No provision for exhaust heated choke.
The Power+Plus Manifold for small block Ford has several features not found in other brands. It has a rear water crossover with two extra NPT ports. It also features nitrous bosses. Recommended carburetor is any square bore 600 cfm or 750 cfm model depending upon engine size and degree of modification. Use a Fel-Pro #1250 intake gasket for best results. Torque manifold bolts to 15-18 lbs./ft. only.
Note that this same basic design is available in a CrossWind version, listed below. As with all Power+Plus manifolds, it is available in a satin or show polished finish.
This manifold is a stock replacement/street legal part for 289 1965-66 Cobra V8s with OEM 4V carb.
Certain exempt aftermarket carbs may also be street legal.
PRICE: (Shipping NOT Included)
54000 (Polished) - $270
54001 (Satin) - $215
FORD
54022 Ford 351W V8 High Performance Typhoon Street Manifold - Polished
54023 Ford 351W V8 High Performance Typhoon Street Manifold - Satin
The Power+Plus Typhoon manifold for 351W engines is the ultimate street performance manifold for this engine. It provides good top end power without sacrificing bottom end torque. Its long runner dual plane design provides the best of both worlds. Best with an aggressive street cam. For street, use 600-750 cfm vacuum secondary or double pumper carb. For competition, use 750-850 cfm double pumper.
This manifold has a number of features not found in similar competitive manifolds. IT includes a rear water crossover passage which can provide for more balanced cylinder head temperatures and a cooler running engine. It also has correctly positioned nitrous bosses for those of you who would like to add port nitrous injectors to your engine.
Remember that every Power+Plus manifold is 100% pressure tested to discover any air, water, or exhaust leaks before you install it on your engine.
Note: This manifold is not legal for sale or use on any pollution controlled motor vehicle.
PRICE: (Shipping NOT Included)
54022 (Polished) - $320
54023 (Satin) - $250
FORD
54025 CrossWind Manifold for Small Block Ford V8 - Polished
54026 CrossWind Manifold for Small Block Ford V8 - Satin
We have taken our highly popular #54000/54001 High Performance Street Manifold for Small Block Ford and modified it to produce a CrossWind variation of this manifold. The CrossWind design incorporates and open area under the plenum to allow a full flow of cooling air to pass through. This is similar to features found on single plane racing manifolds and this design can provide more power and torque duet o a cooler, denser intake charge. Unlike some competitive designs, this manifold features nitrous bosses, four corner water outlets, and a bonus feature of a rear water crossover passage. Available in satin finish or a highly polished show finish, this CrossWind Manifold is also very easy on the pocketbook.
Note: No provision for exhaust heated choke. Will not fit 255 cid V-8. Use Fel-Pro #1250 intake gasket.
This manifold is a stock replacement/street legal part for 289 1965-66 Shelby Mustang V8s with OEM 4V carb. Certain exempt aftermarket carbs may also be street legal.
PRICE: (Shipping NOT Included)
54025 (Polished) - $330
54026 (Satin) - $260
FORD
54030 Ford 260-289-302 Single Plane Racing Manifold - Polished
54031 Ford 260-289-302 Single Plane Racing Manifold - Satin
This manifold is designed for racing or serious street applications using stock cast-iron or aftermarket Windsor style cylinder heads. Includes bosses that can be drilled and tapped for nitrous. It features a rear water crossover passage along with four corner tapped water ports. Ports are 1.90"x1.08" at the gasket flange and the manifold contains enough material to open ports to 2.10" x 1.25". Use Fel-Pro intake gasket #1250 or #1262.
This manifold includes a 1/8-NPT vacuum port under the carb flange, a feature lacking in competitive manifolds of this type.
Note that due to the port layout on small block Ford engines, a single plane manifold, such as this one, will typically be suitable for street use as long as the vehicle is not too heavy.
Note: this manifold is not legal for sale or use on any pollution controlled motor vehicle.
PRICE: (Shipping NOT Included)
54030 (Polished) - $335
54031 (Satin) - $260
FORD
55025 Mopar 318*-340-360 V8 High Performance Street Manifold - Polished
55026 Mopar 318*-340-360 V8 High Performance Street Manifold - Satin
(Also fits Magnum engines)
This CrossWind manifold is designed so that the same model fits both 318*-340-360 engines and the late Magnum V8s. The manifold features an air space under the plenum chamber which allows air to pass through keeping the incoming fuel/air charge cooler than is possible with a conventional design manifold.
The Power+Plus CrossWind for Mopar also features nitrous bosses, an extra water port at the rear of the manifold and is available in a sating finish or highly polished show finish. The manifold is designed to accept the standard length bolts that came with our original engine. Special finishing plugs are provided to attractively cap off the unused bolt holes.
Not only is this CrossWind model loaded with extra features not found on competitive manifolds, it is also substantially less expensive than any similar manifold available for the small block Mopar V8 engine family. Available at performance retailers throughout the U.S. and Canada.
Note: This manifold is not legal for sale or use on any pollution controlled motor vehicle.
PRICE: (Shipping NOT Included)
55025 (Polished) - $335
55026 (Satin) - $260
