CHEVY
52030 Hurricane for 23 Degrees Heads - Polished
52031 Hurricane for 23 Degrees Heads - Satin
The Power+Plus Hurricane Manifold is a single plane 360 degrees design that provides optimum power in the mid to upper rpm ranges. Use with any standard square bore performance carb.
Features include nitrous bosses, dual distributor holddowns, four corner water ports, and more. Kit also includes special water flow divider which can be substituted for a thermostat for racing use.
The Power+Plus Hurricane ports are very specifically positioned to provide an optimum starting point for custom porting. The ports are slightly smaller than Fel-Pro's #1205 gasket.
Ideal manifold for drag racing or short track use. Use a 1" (short track) or 2" (drag race) carb spacer for optimum results. While this manifold is designed to be port matched for racing, if it is used in a non-racing application no port matching is required. Manifold provides all standard bosses and tapped holes for street accessories. Fits standard port location 23 degrees heads including cast iron Bowtie, Dart Iron Eagle, World, plus most aluminum aftermarket 23 degrees heads.
Note: This manifold is not legal for sale or use on any pollution controlled motor vehicle.
PRICE: (Shipping NOT Included)
52030 (Polished) - $300
52031 (Satin) - $220
CHEVY
52032 Hurricane for Vortec Heads - Polished
52033 Hurricane for Vortec Heads - Satin
Patterned after our outstanding Hurricane for conventional small block Chevys, this new manifold is suitable for use on Chevy V8 engines employing Vortec (Gen 1+) cast iron heads or the Edelbrock E-Tec aluminum heads.
This is an ideal manifold for circle track racing and our Hurricane for conventional Chevy 23 degree heads is in wide use in many racing applications. Our Hurricane design has been proven on many dyno test to match our out perform competitive manifolds on high horse power competition racing engines.
You can spend more money for a single plane racing manifold for your small block Chevy, but you won't get a better performing manifold than one from Power+Plus.
Note: This manifold is not legal for sale or use on any pollution controlled motor vehicle.
PRICE: (Shipping NOT Included)
52032 (Polished) - $325
52033 (Satin) - $250
BB CHEVY PERFORMANCE
53000 Street Manifold Non-EGR - Polished
53001 Street Manifold Non-EGR - Satin
The Power+Plus Cyclone Manifold is a direct replacement manifold for the stock manifold on Chevy big block engines with general duty oval port heads. Se note in yellow box below for specifics.
This manifold will not fit under the hood of Corvettes without hood modifications. Will not fit "tall block" V8s. May be used with OEM or aftermarket carburetors.
For street applications use the stock Quadra-Jet carburetor, For Street Performance use a 650-750 cfm performance or double pumper carb and for Competition use a 700-850 cfm double pumper. Note that the Power+Plus Manifold kit includes a carb adapter plate and gasket to allow the use of square bore carburetors. Square bore carbs on this manifold is not legal for use on any emission controlled vehicle. Will fit 1965 through 1990 oval port cylinder heads.
Use a Fel-Pro #1210 (non-Printoseal) or #1212 (Printoseal) intake gasket with his manifold.
Note: This is a stock replacement/street legal part for 396, 402, 427, and 454 V8s with OEM 4-bbl carb;
1965-'72 (1973 non-CA) passenger cars and 1966-'83 trucks, Suburbans, and heavy vehicles; except stock equipped EGR.
PRICE: (Shipping NOT Included)
53000 (Polished) - $275
53001 (Satin) - $215
